Tool Support Systems

 

Nasco Industries • 3541 N.W. 53rd Street • Ft. Lauderdale FL 33309
Phone: 1-954-733-8665 • Toll Free: 1-800-9-NASCO-9
Fax: 1-954-733-8669 • Email: nasco@bellsouth.net

 

Screwfeeders and Presenters
Overhead Runway Tool Supports
Tool Balancers and Load Positioning Systems
Torque Wrenches and Drivers
THE COMPACT
VERTI- TRAK SIDEKICK TORQUE REACTION ARM

VTSK-30FL-S

VTSK-30E-S
  • For air and electric tools.
  • Maintains tool in a vertical position.
  • Available with pneumatic Feather-Lite or adjustable tension tool balancing system
  • No torque reaction up to 150 in.-lbs.
  • Two mounting options, bench or inverted shelf mount.
  • Tool capacity up to 5 lbs.
  • Adjustable arm height.
  • Large workstation coverage.
  • Optional clean room version.
  • Made in the U.S.A..
FEATHER LITE
TOOL BALANCING SYSTEM
  • Air regulator provides continuous balancing adjustment.
  • No tug when pulling down.
  • No resistance when pushing up.
  • Stays where positioned.
  • Check valve holds tool in position when air supply is removed.

BENCH MOUNT
Model Min. Reach Max. Reach Stand Height Max. Tool Wt. Vert. Stroke.
VTSK-30-FL-S 3" 30" 18.5" 5 LBS. 11"
VTSK-36-FL-S 3" 36" 18.5" 4 LBS. 13"
All units include swivel vertical post, coil hose, supplly air hose, Feather Lite air balancing system, 1/4" x 1/4" and 1/4" x 1/8" nipples for air tool hook-up, mounting screws and Verti-Trak Sidekick torque reaction arm.

FOR ELECTRIC TOOLS
Model Min. Reach Max. Reach Stand Height Max. Tool Wt. Vert. Stroke.
VTSK-30E-FL-S 1" 32" 18.5" 4 LBS. 11"
VTSK-36E-FL-S 1" 38" 18.5" 3 LBS. 13"
All units include swivel vertical post, supply air hose, Feather Lite air balancing system, electric tool clamp, quick release pin for instant tool changes, electric cord clamps, mounting screws and Verti-Trak Sidekick torque reaction arm.

SHELF MOUNT
Add prefix SM- to part number. Allows mounting in an inverted position for mounting under a shelf or from an overhead runway system.

CLEAN ROOM
Add suffix -CR to part number. Supplied with a stainless steel balancing spring, stainless steel swivel base, nickel plated aluminum post and nickel plated aluminum Verti-Trak arm.

ADJUSTABLE TENSION
TOOL BALANCING SYSTEM