OVERHEAD RUNWAY TOOL AAASUPPORT SYSTEMS

  • Pre-engineered systems
  • Order a complete standard support system with one part number
  • Standard systems from 4 foot to 12 foot lengths
  • Bench mount, floor mount or wall mount
  • One or two runways
  • With or without air fittings
  • Heavy duty steel tubing construction
  • 144 standard systems
Part Numbering System

1/4” air fittings are supplied as standard on -A- models. For 3/8” fittings, add suffix -H. To add one FRL unit, add suffix -FRL. To add two FRL units, add suffix -2 FRL.

ORDERING PROCEDURE
  1. Select the desired physical configuration from illustrations A thru P
  2. Refer to the corresponding systems table to select your specific model. See the explanation of part numbering system for reference.
  3. Add desired accessories and/or options.
OPTIONS*
  • Non-standard lengths
  • Non-standard heights
  • Balancers
  • Multiple air lines for more than one tool per runway
  • Sidekick torque reaction arms
  • Additional trolleys, end stops, end clamps
  • Factory-installed filter-regulator- gauge-lubricator (FRL) mounted to vertical supports
  • Bench clamps
* Consult factory for quotations on non-standard sizes and configurations.
** 86 3/4” height supplied as standard (F). For 96” height, specify as F1.
Nasco Industries • 3541 N.W. 53rd Street • Ft. Lauderdale FL 33309
Phone: 1-954-733-8665 • Toll Free: 1-800-9-NASCO-9
Website: www.nascoindust.com • Email: nasco@bellsouth.net